@echo off
:main
cls
echo.
echo.
echo 1.生成自动配置计算机名,DNS,网关,IP脚本,IPX内部网络号
echo.
echo 2.网刻服务器自动配置
echo.
echo 3.电信网通线路切换生成器
echo.
echo 4.退出脚本
echo.
echo 请输入1,2,3或4,输入其他字符,后果自负.

:restart1
set /p select=请输入:
set /a select=%select%-0
if %select%==1 goto ipdnsipx
if %select%==2 goto netghost
if %select%==3 goto dianxin
if %select%==4 goto endend
if %select% gtr 4 goto errorselect1
:ipdnsipx
cls
echo -------------------------------------------------------
echo.
echo 说明
echo 本批处理可以根据不同使用场合按照提示
echo 输入IP,DNS(最多支持两个DNS),网关,计算
echo 机名.生成配置相关信息的脚本功能.
echo -------------------------------------------------------
:restart5
color 0a
echo.
echo 请输入1或者2,输入其他字符,后果自负.
echo.
echo 1.生成自动配置计算机名,DNS,网关,IP脚本,IPX内部网络号
echo.
echo 2.返回主菜单
echo.
set /p select=请输入:
set /a select=%select%-0
if %select%==1 goto config5
if %select%==2 goto main
if %select% gtr 2 goto errorselect5
:config5
echo 开始生成配置计算机名,网关,DNS,IP,IPX协议内部网络号的脚本,请根据提示输入必要的参数
echo.
set ipaddr=192.168.0.
set mask1=254
set submask1=255.255.255.0
set qz=pc
set dns1=61.177.7.1
set dns2=192.168.0.254
echo 默认计算机名前缀为:%qz%,IP地址前三字段为:%ipaddr%,网关为:%ipaddr%%mask1%,子网掩码为%submask1%,第一DNS为%dns1%,第二DNS为%DNS2%.如需修改这里的信息,请注意下面的提示,按照提示输入即可完成相关信息的修改.否则,直接敲回车键将使用默认配置.
echo.
set /p ipaddr=请输入IP地址的前三个字段例如:192.168.0. 一定要按照这个格式输入:
color 70
set /p mask1=请输入网关最后一个字段,例如192.168.0.254中的254:
color 71
set /p submask1=请输入子网掩码,格式为255.255.255.0:
color 74
set /p qz=请输入计算机名前缀:
color 72
set /p dns1=请输入第一DNS地址：
color 73
set /p dns2=请输入第二DNS地址：
color fc
echo 正在生成配置脚本

echo @echo off>%systemroot%\ipconfig.bat
echo cls%systemroot%\ipconfig.bat
echo echo ---------------------------------------------------------%systemroot%\ipconfig.bat
echo echo QQ:66596854欢迎交流%systemroot%\ipconfig.bat
echo echo Mail:fan2800@hotmail.com%systemroot%\ipconfig.bat
echo echo.%systemroot%\ipconfig.bat
echo echo 说明%systemroot%\ipconfig.bat
echo echo 本批处理可以实现根据需要自动配置IP，%systemroot%\ipconfig.bat
echo echo DNS，网关，计算机名,最多支持两个DNS%systemroot%\ipconfig.bat
echo echo 批处理启动密码为wuliaodefei,可以根据%systemroot%\ipconfig.bat
echo echo 需要修改变量PW来改变启动密码。修改适%systemroot%\ipconfig.bat
echo echo 合自己的DNS，网关，计算机名.可以看批%systemroot%\ipconfig.bat
echo echo 处理的相关注释的地方，在批处理的结尾%systemroot%\ipconfig.bat
echo echo 还可以继续进行添加命令，实现更多功能，%systemroot%\ipconfig.bat
echo echo 例如，导入CS的CD-KEY，自动安装冰点等.%systemroot%\ipconfig.bat
echo echo -------------------------------------------------------%systemroot%\ipconfig.bat
echo set sz=3 %systemroot%\ipconfig.bat
echo :pw%systemroot%\ipconfig.bat
echo set /p pw=请输入密码：%systemroot%\ipconfig.bat
echo set /a sz=%%sz%%-1 %systemroot%\ipconfig.bat
echo if %%pw%%==wuliaodefei goto config%systemroot%\ipconfig.bat
echo echo 密码错误,还有%%sz%%次机会%systemroot%\ipconfig.bat
echo if %%sz%%==0 exit%systemroot%\ipconfig.bat
echo color ca %systemroot%\ipconfig.bat
echo goto pw%systemroot%\ipconfig.bat

echo :config%systemroot%\ipconfig.bat
echo cls%systemroot%\ipconfig.bat
echo color 0A%systemroot%\ipconfig.bat
echo echo 欢迎使用%systemroot%\ipconfig.bat
echo echo.%systemroot%\ipconfig.bat
echo cls%systemroot%\ipconfig.bat
echo :ipconfigstart%systemroot%\ipconfig.bat
echo set ip=0 %systemroot%\ipconfig.bat
echo set /p ip=请输入IP:%systemroot%\ipconfig.bat
echo if %%ip%%==0 goto errorip %systemroot%\ipconfig.bat
echo set /a ip=%%ip%%-0%systemroot%\ipconfig.bat
echo if %%ip%% lss 10 goto 1to9 %systemroot%\ipconfig.bat
echo if %%ip%% lss 100 goto 10to99%systemroot%\ipconfig.bat
echo if %%ip%% lss 255 goto 100to254%systemroot%\ipconfig.bat
echo if %%ip%% geq 255 goto error1%systemroot%\ipconfig.bat
echo :1to9%systemroot%\ipconfig.bat
echo set a=00%systemroot%\ipconfig.bat
echo goto ipconfig%systemroot%\ipconfig.bat

echo :10to99%systemroot%\ipconfig.bat
echo set a=00%systemroot%\ipconfig.bat
echo set /a a=%%a%%-0%systemroot%\ipconfig.bat
echo goto ipconfig%systemroot%\ipconfig.bat
echo :100to254%systemroot%\ipconfig.bat
echo set a=%systemroot%\ipconfig.bat
echo :ipconfig%systemroot%\ipconfig.bat
echo echo 您设置的计算机名为：%qz%%%a%%%%ip%% IP地址为：%ipaddr%%%ip%% 网关为：%ipaddr%%mask1%%systemroot%\ipconfig.bat
echo echo 开始配置计算机名%systemroot%\ipconfig.bat
echo color 1a %systemroot%\ipconfig.bat
echo reg add HKLM\system\currentcontrolset\control\computername\computername\ /v computername /t reg_sz /d %qz%%%a%%%%ip%% /f ^>nul%systemroot%\ipconfig.bat
echo reg add HKLM\system\currentcontrolset\services\tcpip\Parameters\ /v "NV Hostname" /t reg_sz /d %qz%%%a%%%%ip%% /f ^>nul%systemroot%\ipconfig.bat
echo echo 计算机名配置完成%systemroot%\ipconfig.bat
echo set /a ip=%%ip%%-0%systemroot%\ipconfig.bat
echo echo 开始配置IP,网关%systemroot%\ipconfig.bat
echo color 2a %systemroot%\ipconfig.bat
echo netsh interface ip set address "本地连接" source=static %ipaddr%%%ip%% %submask1% %ipaddr%%mask1% 1 ^>nul%systemroot%\ipconfig.bat
echo echo IP配置完成%systemroot%\ipconfig.bat
echo echo 开始配置DNS%systemroot%\ipconfig.bat
echo netsh interface ip set dns name="本地连接" source=static %dns1% primary ^>nul%systemroot%\ipconfig.bat
echo netsh interface ip add dns name="本地连接" %dns2% ^>nul%systemroot%\ipconfig.bat
echo echo DNS配置完成%systemroot%\ipconfig.bat
echo echo 开始配置IPX协议内部网络号%systemroot%\ipconfig.bat
echo color 3a %systemroot%\ipconfig.bat
echo reg add HKLM\SYSTEM\CurrentControlSet\Services\NwlnkIpx\Parameters /f /v VirtualNetworkNumber /t REG_DWORD /d %%ip%%%systemroot%\ipconfig.bat
echo echo IPX协议内部网络号配置完成%systemroot%\ipconfig.bat
echo echo 删除注册表自启动项%systemroot%\ipconfig.bat
echo reg delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /f /v computerconfigscript %systemroot%/ipconfig.bat
echo echo 删除注册表启动项目完毕%systemroot%\ipconfig.bat

echo echo 系统将在30秒后自动重新启动，输入N取消重起，并在稍后手动重起计算机 %systemroot%\ipconfig.bat
echo start %%systemroot%%\system32\shutdown -r -t 30%systemroot%\ipconfig.bat
echo set /p restart1=%systemroot%\ipconfig.bat
echo if %%restart1%%==n start %%systemroot%%\system32\shutdown -a%systemroot%\ipconfig.bat
echo goto end%systemroot%\ipconfig.bat
echo :error1%systemroot%\ipconfig.bat
echo echo 您输入的IP违反了IP地址使用规则，请根据需要务必输入1--254之间的数字%systemroot%\ipconfig.bat
echo goto ipconfigstart%systemroot%\ipconfig.bat
echo :errorip%systemroot%\ipconfig.bat
echo echo 您没有输入IP,请重新输入%systemroot%\ipconfig.bat
echo goto ipconfigstart%systemroot%\ipconfig.bat
echo color fc %systemroot%\ipconfig.bat
echo :end%systemroot%\ipconfig.bat
echo rem 11月19日晚版%systemroot%\ipconfig.bat
echo exit%systemroot%\ipconfig.bat
echo 配置脚本生成完毕
echo 正在设置注册表自启动脚本
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /f /v computerconfigscript /t REG_SZ /d %systemroot%\ipconfig.bat >nul
echo 注册表启动项目添加完成
echo 10秒后程序自动退出或直接关闭程序退出
ping /n 15 127.0.0.1 >nul
exit

:errorselect5
echo 选择错误,请重新选择
goto restart5
:errorselect1
echo 选择错误,请重新选择
goto restart1

:netghost
color 0a
cls
echo --------------------------------------------------------
echo.
echo 说明
echo 本批处理可以按要求设置GHOST服务器的
echo 相关信息,并自动调用GHOSTSERVER程序
echo 以方便设置.本批处理只支持单网卡,网
echo 络属性名称为"本地连接".否则此批处理
echo 不适用或者达不到预期的效果.此脚本为
echo 现场使用版,即当前的设置只对脚本运行
echo 中起作用,脚本运行时非正常退出时也达
echo 不到预期的效果,谢谢使用
echo -------------------------------------------------------
echo.
echo 1.进入设置GHOST服务器
echo.
echo 2.自动还原以前设置
echo.
echo 3.返回主菜单
echo.
echo 请输入1,2或3,输入其他字符,后果自负.

:restart
set /p select=请输入:
set /a select=%select%-0
if %select%==1 goto config1
if %select%==2 goto config2
if %select%==3 goto main
if %select% gtr 3 goto errorselect
:config1
set /p ip1=请输入当前GHOST服务器需要使用的IP地址:
set /p mask1=请输入当前GHOST服务器需要使用的子网掩码:
echo @echo off >%systemroot%\netghost.bat
echo echo 备份当前的网络设置 %systemroot%\netghost.bat
echo ipconfig /all ^>%systemroot%\ipconfigbackup.txt%systemroot%\netghost.bat
echo echo 当前网络设置备份完成%systemroot%\netghost.bat
echo echo 清除当前DNS,网关设置%systemroot%\netghost.bat
echo netsh interface ip delete address "本地连接" gateway=all ^>nul %systemroot%\netghost.bat
echo netsh interface ip delete dns "本地连接" all ^>nul %systemroot%\netghost.bat
echo echo 配置当前网络设置 %systemroot%\netghost.bat
echo netsh interface ip set address "本地连接" source=static %ip1% %mask1% ^>nul %systemroot%\netghost.bat
echo echo 当前网络设置完毕 %systemroot%\netghost.bat
echo echo 启动GHOST服务端程序 %systemroot%\netghost.bat
echo start ghostsrv83.exe %systemroot%\netghost.bat
echo del %%systemroot%%\netghost.bat %systemroot%\netghost.bat
echo exit %systemroot%\netghost.bat
%systemroot%\netghost.bat
exit

:config2
find /i "IP Address" %systemroot%\ipconfigbackup.txt >ipaddr.txt
for /f "skip=2 tokens=15" %%p in (ipaddr.txt) do set ipaddr=%%p
find /i "Subnet Mask" %systemroot%\ipconfigbackup.txt >subnetmask.txt
for /f "skip=2 tokens=15" %%b in (subnetmask.txt) do set sub=%%b
find /i "Default Gateway" %systemroot%\ipconfigbackup.txt >gateway.txt
for /f "skip=2 tokens=13" %%g in (gateway.txt) do set gate=%%g
find /i "DNS Servers" %systemroot%\ipconfigbackup.txt >dnss.txt
for /f "skip=2 tokens=15" %%d in (dnss.txt) do set dns1=%%d
for /f %%n in (%systemroot%\ipconfigbackup.txt) do set dns2=%%n
del ipaddr.txt
del subnetmask.txt
del gateway.txt
del dnss.txt
echo %ipaddr% %sub% %gate% %dns1% %dns2%
echo @echo off >%systemroot%\restore.bat
echo echo 恢复IP,DNS,子网掩码,网关设置 %systemroot%\restore.bat
echo netsh interface ip set address "本地连接" source=static %ipaddr% %sub% %gate% 1 ^>nul %systemroot%\restore.bat
echo netsh interface ip set dns name="本地连接" source=static %dns1% primary ^>nul %systemroot%\restore.bat
echo netsh interface ip add dns name="本地连接" %dns2% ^>nul %systemroot%\restore.bat
echo echo 恢复完成%systemroot%\restore.bat
echo del %%systemroot%%\restore.bat %systemroot%\restore.bat
echo exit %systemroot%\restore.bat
%systemroot%\restore.bat
exit
:errorselect
echo 选择错误,请重新选择
goto restart
:dianxin
color 0a
cls
echo -------------------------------------------------------
echo.
echo 说明
echo 本批处理可以按要求设置进行电信与网
echo 通之间的线路切换.本批处理只支持单否
echo 网卡,网络属性名称为"本地连接".则此
echo 批处理不适用或者达不到预期的效果.
echo 此脚本为现场使用版,即当前的设置只
echo 对脚本运行中起作用,脚本运行时非正常
echo 退出时也达不到预期的效果,谢谢使用
echo -------------------------------------------------------
echo.
echo 请输入1或者2,输入其他字符,后果自负.
echo.
echo 1.进入电信网通线路切换生成器
echo.
echo 2.返回主菜单
echo.
:restart2
set /p select=请输入:
set /a select=%select%-0
if %select%==1 goto config3
if %select%==2 goto main
if %select% gtr 2 goto errorselect3
:config3
echo 特别注意:使用本脚本切换网关以后,在网络属性里面看到网关地址有出入,但不影响使用,此时在网络属性里面看到的网关,不起任何作用，但不要做任何操作.
echo.
set /p gateway1=请输入要切换的网关:
set /p dns1=请输入要切换的DNS地址:
echo @echo off >gatewaychange.bat
echo echo 切换中,请稍等. gatewaychange.bat
echo netsh interface ip delete dns "本地连接" all ^>nul gatewaychange.bat
echo netsh interface ip set dns name="本地连接" source=static %dns1% primary ^>nul gatewaychange.bat
echo route delete 0.0.0.0 gatewaychange.bat
echo route add 0.0.0.0 mask 0.0.0.0 %gateway1% gatewaychange.bat
rem 到这里本脚本以实现了,生成切换电信与网通线路的脚本文件.只是生成脚本文件不会自动运行,方便只需要脚本文件然后自己处理生成后的脚本文件的朋友使用.
rem 把下面2行前面的rem字符删除,可以实现即时的线路切换(输入相关信息后会自动运行生成的脚本,无需要再次运行生成的脚本就可以完成线路切换)
rem echo del gatewaychange.bat gatewaychange.bat
rem gatewaychange.bat
exit
:errorselect3
echo 选择错误,请重新选择
goto restart2


:endend
exit